Difference: EditingProcessModules (10 vs. 11)

Revision 112010-01-28 - KatTrevor

Line: 1 to 1
 
META TOPICPARENT name="ArenaGuide"

Editing Process Modules

Line: 6 to 6
  You can change the name of the module by editing the Name field.
Changed:
<
<
Next, you must specify the Logic of the Process module by choosing the type of Action. There are several Action options available which apply to different logic situations. These are Delay, Seize Delay, Seize Delay Release and Delay Release. In some cases you will need to Add a resource to be seized (however Arena will prompt you if this is required).
>
>
Next, you must specify the Logic of the Process module by choosing the type of Action. There are several Action options available which apply to different logic situations. These are Delay, Seize Delay, Seize Delay Release and Delay Release. In some cases you will need to Add a resource to be seized (however Arena will prompt you if this is required).
  You must also define several other properties of the Process module. The Delay Type refers to which distribution is to be used to delay a resource and you can select from five different distributions. Mimimum, Maximum and Most Likely values must also be defined for the distrubtion and the units must be specified. You must also define the Allocation for the distribution (See Arena help for more details).
Line: 14 to 14
  The Name has beeen defined and the user has selected the type of Action to be taken in the Logic area to be Seize Delay Release. This means that the data will seize the link (so it can be transmitted), there will be a delay while the data is using the link and then the link will be released for other data to use it.
Changed:
<
<
A recourse has been added. In this case simply define a Link resource and set the Quantity to be 1 (only one link is needed to transmit the data).
>
>
A resource has been added. In this case simply define a Link resource and set the Quantity to be 1 (only one link is needed to transmit the data).
  Finally, the default Delay Type is triangular so you only the Units and Minimum, Value and Maximum needed to be adjusted.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback