**Figure 1** Whiskas cat food label

Whiskas cat food (shown in Figure 1) is manufactured by Uncle Ben's. Uncle Ben's want to produce their cat food products as cheaply as possible while ensuring they meet the stated nutritional analysis requirements shown on the cans (see Figure 2). Thus they want to vary the quantities of each ingredient used (the main ingredients being chicken, beef, mutton, rice, wheat and gel) while still meeting their nutritional standards (see Figure 3).

**Figure 2** Ingredients and nutritional requirements

**Figure 3** Setting the mix of ingredients

The costs of the chicken, beef, and mutton are $0.013, $0.008 and $0.010 respectively, while the costs of the rice, wheat and gel are $0.002, $0.005 and $0.001 respectively. (All costs are per gram.) In this case study, we will ignore the vitamin and mineral ingredients. (Any costs for these are likely to be very small anyway.)

Each ingredient contributes to the total weight of protein, fat, fibre and salt in the final product. The contributions (in grams) per gram of ingredient are given in Table 1.

**Table 1** Contributions of ingredients

Protein | Fat | Fibre | Salt | |
---|---|---|---|---|

Chicken | 0.100 | 0.080 | 0.001 | 0.002 |

Beef | 0.200 | 0.100 | 0.005 | 0.005 |

Mutton | 0.150 | 0.110 | 0.003 | 0.007 |

Rice | 0.000 | 0.010 | 0.100 | 0.002 |

Wheat bran | 0.040 | 0.010 | 0.150 | 0.008 |

Gel | - | - | - | - |

We will formulate the Whiskas Cat Food Problem as a mathematical programme (using the 4 key steps).

1. *Identify the Decision Variables*

For the Whiskas Cat Food Problem the decisions are the grams of each of the different ingredients we include in the can.

We must formally define our decision variables, being sure to state the units we are using.

2. *Formulate the Objective Function*

For the Whiskas Cat Food Problem the objective is to minimise the total cost of ingredients per can of cat food.

We know the cost per g of each ingredient, so we can define our objective: to minimise the total cost of a can

3. *Formulate the Constraints*

The constraints for the Whiskas Cat Food Problem are that:

- The sum of the amounts must make up the whole can (= 100g).
- The stated nutritional analysis requirements are met.

The constraint for the "whole can" is:

To meet the nutritional analysis requirements, we need to have at least 8g of Protein per 100g, 6g of fat, but no more than 2g of fibre and 0.4g of salt. To formulate these constraints we make use of the previous table of contributions from each ingredient. This allows us to formulate the following constraints on the total contributions of protein, fat, fibre and salt from the ingredients:

4. *Identify the data*

We know the total weight of the can. We also know the cost of the ingredients, the nutritional analysis requirements and the contribution (per gram) of each ingredient in terms of the nutritional analysis. This is enough to formulate the necessary mathematical programme. However, we will reconsider our data after solving the mathematical programme and performing some analysis.

The previous formulation will solve the Whiskas Cat Food Problem for the given ingredients and requirements, however we would have to reformulate if a new ingredient or requirement was added. We can "abstract" the data to make our formulation more general and thus easier to modify when the data changes.

Let be the set of all ingredients and let be the set of all requirements (cf. inputs and outputs in a blending model).

Now the decision variables become

Let be the weight of the can and be the cost per g of ingredient . The objective function becomes

Finally, let be the "contribution" that 1g of ingredient makes to requirement and let and be the lower and upper bounds on requirement respectively. Now the constraints can be expressed

Note that whole can constraint can be easily incorporated in this generalised formulation by setting and .

Using our original formulation, the computational model in AMPL would have been time consuming (and repetitive!) to create, e.g.,

var x1 >= 0; # Amount (g) of chicken meat used in a can of cat food var x2 >= 0; # Amount (g) of beef used in a can of cat food . . . var x6 >= 0; # Amount (g) of gel used in a can of cat food (= g)Note that the

`#`

is used for commenting.
However, we can easily translate our generalised formulation into AMPL. First, we define the sets for the ingredients and requirements

set INGREDIENTS; set REQUIREMENTS;We will see later how to "populate" these sets using an AMPL data file.

Using the sets we can define the decision variables

var Amount {INGREDIENTS} >= 0;parameters for the costs

param Cost {INGREDIENTS};and the objective function

minimize TotalCost : sum {i in INGREDIENTS} Cost[i] * Amount[i];

Now we have a variable that determines the amount (in g) of each ingredient (whatever they may be) in a can of Whiskas and our objective is to minimize the total unit cost of producing the cans (although we haven't specified the actual costs yet).

Next, we need to define parameters for the contribution each ingredient makes to the requirements and for the bounds on the requirements themselves

param Contributes {REQUIREMENTS, INGREDIENTS}; param Lower {REQUIREMENTS} default -Infinity; param Upper {r in REQUIREMENTS} >= Lower[r], default Infinity;

Note the use of a bound to ensure that `Upper`

`Lower`

and default values for the requirement bounds.

Finally, we can formulate the constraints in AMPL

subject to MeetRequirements {r in REQUIREMENTS} : Lower[r] <= sum {i in INGREDIENTS} Contributes[r, i] * Amount[i] <= Upper[r];

Now our AMPL model is complete (see whiskas.mod for a complete AMPL model file).

Once an AMPL model file is complete, we need to create a data file to create an "instance" of this problem. Note that we can use several different data files with the same model file (in practice this means solving the same mathematical programme with different data).

First, create a new data file for AMPL and save it as `whiskas.dat`

.

Next, all our AMPL expressions rely on the sets `INGREDIENTS`

and `REQUIREMENTS`

, so we will define these first. Remember, when AMPL is in data mode (see The AMPL Process), we don't need to enclose set elements with `'`

and `'`

(unless there is a whitespace within the symbol). We also don't need `{`

and `}`

to signify the start and end of a set.

We can define the sets of ingredients and requirements using the `set`

keyword and the assignment operator `:=`

set INGREDIENTS := CHICKEN BEEF MUTTON RICE WHEAT GEL ; set REQUIREMENTS := PROTEIN FAT FIBRE SALT ONECAN ;

**Note** Since whitespace signifies the end of a symbol, you need space before
the terminating `;`

.

Now the set of ingredients has been established, we can assign data to parameters that use that set.

First, define the parameter `Cost`

param Cost := CHICKEN 0.013 BEEF 0.008 ... GEL 0.001 ;

Then, use a *transposed table* to define the nutritional contribution per gram for the ingredients

param Contributes (tr): PROTEIN FAT FIBRE SALT ONECAN := CHICKEN 0.100 0.080 0.001 0.002 1.0 BEEF 0.200 0.100 0.005 0.005 1.0 MUTTON 0.150 0.110 0.003 0.007 1.0 RICE 0.000 0.010 0.100 0.002 1.0 WHEAT 0.040 0.010 0.150 0.008 1.0 GEL 0.0 0.0 0.0 0.0 1.0 ;

Finally, we can define both the `Lower`

and `Upper`

parameters

param Lower := PROTEIN 8.0 FAT 6.0 ONECAN 100 ; param Upper := FIBRE 2.0 SALT 0.4 ONECAN 100 ;

Now our data file whiskas.dat is complete.

Now we can use AMPL to determine how to optimally mix the ingredients in a can of cat food. First, start a command line application and navigate to the directory where you saved `whiskas.mod`

and `whiskas.dat`

. Then start AMPL.

Create the model in AMPL by typing:

model whiskas.mod;

Populate the model with data by typing:

data whiskas.dat;

Choose the CPLEX solver (although MINOS also solves linear programming models):

option solver cplex;

and solve The Whiskas Cat Food Problem using AMPL:

solve;

To see the amount (in g) of each ingredient to include in the 100g can:

display Amount;

When you are developing a model and running it many times (while testing and debugging) you might like to create a script file. For the Whiskas Cat Food Problem your script file `whiskas.run`

will be:

reset; model whiskas.mod; data whiskas.dat; option solver cplex; solve; display Amount;

Remember, you can run the script file in AMPL with the command:

include whiskas.run;

Running `whiskas.run`

gives the following output:

ampl: include whiskas.run; CPLEX 10.1.0: optimal solution; objective 0.52 2 dual simplex iterations (0 in phase I) Amount [*] := BEEF 60 CHICKEN 0 GEL 40 MUTTON 0 RICE 0 WHEAT 0 ;

This solution indicates that the mix of ingredients for minimising the cost of a can of Whiskas cat food is to use 60g of beef and 40g of gel. The cost of the can will be 52c.

For the Whiskas Cat Food Problem we will not perform any *post-optimal* analysis.

**Validation** To validate our solution for the Whiskas Cat Food Problem, we can do a quick check that our solution makes sense. First, the amounts should add up to the weight of the can (e.g., 60g + 40g = 100g). If not, there is something wrong.

Next, we can do a quick check of the constraints to ensure none of them are violated. For large models you won't always be able to check the solution by hand. However, you can use AMPL expressions to quickly calculate quantities needed for validation.

ampl: display {r in REQUIREMENTS} sum {i in INGREDIENTS} Contributes[r, i] * Amo unt[i]; sum{i in INGREDIENTS} Contributes[r,i]*Amount[i] [*] := FAT 6 FIBRE 0.3 ONECAN 100 PROTEIN 12 SALT 0.3 ; ampl: display Lower, Upper; : Lower Upper := FAT 6 Infinity FIBRE -Infinity 2 ONECAN 100 100 PROTEIN 8 Infinity SALT -Infinity 0.4 ;

The final validation is to write up a management summary for your manager and/or client and see if they think your solution is a valid one. If they identify some (or all) of the solution that is not valid, then you should discuss with them the reasons why it is invalid and start a "feedback" loop in the Operations Research methodology.

The solution for the Whiskas Cat Food Problem is a simple one to summarise. Here is the management summary for the Whiskas Cat Food Problem.

**Important** When presenting your solution you must be careful about the number of decimal places you use. You should not use a greater accuracy than your data allows.

1. Using

`whiskas.mod`

, `whiskas.dat`

and `whiskas.run`

, solve the Whiskas Cat Food Problem. Write a management summary for your solution.
**What to hand in**
Your management summary.

2. Find the optimal mix of ingredients if the can weighs 150g and ham is available as an ingredient that costs $0.007 per g and each g of ham contributes 0.180g of protein, 0.110g of fat, 0.002g of fibre and 0.008g of salt. **Note** The nutritional requirements are expressed as *percentages* of the can weight so these will change.
Write a management summary for your solution.

**What to hand in**
Your new data file `whiskas.dat`

and your management summary.

I | Attachment | History | Action | Size | Date | Who | Comment |
---|---|---|---|---|---|---|---|

doc | whiskas.doc | r2 r1 | manage | 38.0 K | 2008-03-11 - 21:07 | MichaelOSullivan | |

run | whiskas.run | r2 r1 | manage | 0.1 K | 2008-02-24 - 05:50 | MichaelOSullivan | |

dat | whiskas.dat | r4 r3 r2 r1 | manage | 0.9 K | 2008-03-09 - 23:21 | MichaelOSullivan | |

mod | whiskas.mod | r6 r5 r4 r3 r2 | manage | 1.1 K | 2008-03-04 - 21:58 | MichaelOSullivan |

Topic revision: r56 - 2019-07-20 - TWikiAdminUser

Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Ideas, requests, problems regarding TWiki? Send feedback

Ideas, requests, problems regarding TWiki? Send feedback